应用概况

分析点 / 参数 分析物 测量范围 适合分析仪
富胺 rich amine 硫化氢 H2S 0 to 0.5 mol H2S/mol amine OMA 硫化氢分析仪
二氧化碳 CO2 - MCP-200 红外分析仪

测量富胺中的二氧化碳

推荐使用: MCP-200 红外分析仪

测量富胺中的硫化氢

推荐使用: OMA 硫化氢分析仪

Amine gas treating is used to remove H2S and CO2 from sour gas for environmental reasons. In the absorber unit, an amine solution absorbs H2S and CO2 molecules from the feed gas in order to "sweeten" the upflowing gas stream.

Gradually, the amine becomes "rich" (i.e. saturated) with absorbed H2S and loses scrubbing efficiency. The rich amine must be sent to a regenator unit (typically comprised of a stripper with a reboiler) to be converted back into fresh "lean" amine for recycling into the absorber unit.

The lean amine produced by the regenerator should be validated by a continuous H2S loading measurement to ensure there are no problems with the stripper. Watching breakthrough levels in the lean amine allow for prompt response to regenerator problems and prevent treating efficiency losses from sending ineffective amines to the absorber.

返回顶端